Peephole Camera Wifi 4.3 Inch Monitor Smart Video Doorbell HD1080P Night Vision PIR Motion Detection APP Control For IOS Andriod
1. The resolution of 500P and 500PC are 1080P and they have 1pcs 5000mAH battery inside;They have the same functions!!
2. 500PC APP are “YCC365 PLUS” ;
500P APP is “Tuya”!
3. The doorbell must work with 2.4G WIFI of router, can’t work with 5G WIFI, if your router has both 2.4G and 5G, please close the 5G firstly then connect it to the APP, after success, you can open the 5G WiFi for normal use, thanks!!
WiFi connection & HD peephole, remote intercom, suitable for IOS and android smartphone.
4.3 inch high-definition LCD screen
HD 1080P image ultra-low power consumption design
Quick access via app (automatically wakes up within 3 seconds)
Respond to users access demands within 1 second
2pcs IR Leds, support 2-way audio with noise cancellation
APP support iOS & Android
Automatic take a picture & video recording when visitor press doorbell
PIR motion detect alarm
Cloud storage function
Support max. 128GB TF card to save video recording (not included)
Built-in 5000mAh lithium battery and easy charge by USB
No need charge within 6 months
The newest design case-weatherproof
Easy installation (no need any cable), just wifi connection
LCD Display Size: 4.3 inch
– Image Sensor
Solution: OV9712 CMOS Sensor + Hi3518E SoC
Display Resolution: 2.0MP-1920*1080P
Focal Length: 1.7mm
Angle of View:120 degreewide angle
Input/Output: Built-in microphone&speaker
Type: 2-way audio with noice cancellation
Video Compression: H.265
Stream: Double stream
Night Vision: 2pcs IR-LEDs
PIR Motion Detect: Yes
Wireless Standard: 2.4Ghz WiFi IEEE 802.11b/g/n
500PC APP: “YCC365 PLUS”
500P APP: “Tuya”
Mobile Phone Memory: Yes
SD TF Card: Max. 128GB (not included)
Cloud Function: Yes
Power Supply:Built-in Lithium Battery and Easy Charged by USB
Charging Port: Micro USB
Working Mode: 380mA (IR on)
Standby Mode: 200uA
LCD Dimension: 140*82*20 mm
Camera Machine: 64.5*64.5*16 mm (copper)
User Accounts: Total 4 Users
Working Temperature: -20℃ to 55℃
Relative Humidity: 85% non-condensing
1x WiFi Peephole Viewer (indoor)
1x Doorbell (outdoor)
1x Micro USB Cable
1x Mounting Plate
1x Screw Kit
1x User Manual
Notice: TF card is not included!!!
How to Install Wall:
How to Solve the Problem:
1. WONT TURN ON:
Please ensure that the device
is properly charged.
2. DEVICE WONT TURN ON AFTER INITIAL USE:
If you remove the device from the mounting plate while the
Tamper Alarm function is turned on, you may disable the device.
simply put it back 0n the mounting plate
and press the doorbell button.
GO to the app settings to turn off the Tamper Alarm.
If prompted with “The Connection Failed, Please Check The
Wi-Fi Configuration is Correct” when ringing the doorbell
after the device has been successfully configured,
there may be too many barriers (typically walls) between
your Wi-Fi router and the device which has weakened the signal.